Configure the Zoom 5801 ATA to Work with Localphone
The Zoom 5801 is an ATA which lets you use your traditional analogue telephone with Localphone’s VoIP services. This guide describes how to configure the device to work with your Localphone account.
-
Connect and Log in to Your Zoom 5801
Follow the instructions that came with your Zoom 5801 to connect and log in to the device’s configuration console. The default username is “administrator” with the password “metamorph”, though these values may have been changed during installation.
-
Enter Your Localphone Account Details
Choose “Advanced” from the top navigation, and “VoIP Accounts” from the left-hand menu. On the new page enter the following details to configure your Localphone account, leaving any others blank or as their default value:
Setting Value SIP Enable Enable Service Provider Name Localphone Outbound Caller ID Name [Full Name] Phone Number (SIP User ID) [DID] Auth User Name [SIP ID] Auth Password [SIP Password] SIP Server localphone.com Auth Domain localphone.com Outbound Proxy proxy.localphone.com Register Domain proxy.localphone.com ReReg Interval 120 ReSub Interval 1800 Ring Type 1 Preferred Codecs G.711u, and G.711A -
Check Your Configuration
Now that you have configured your Zoom 5801 to work with your Localphone account, the form should resemble the following:
-
Save Your Settings and Reboot the Zoom 5801
Use the “Save These Settings” button to store the new Localphone configuration, and reboot your Zoom 5801 with the “Reboot ATA” button.
Following the steps above, you should now be able to connect to Localphone and make and receive calls. For further information about configuring the Zoom 5801, or for help with troubleshooting, please see:
This guide is provided for assistance. If you discover any errors in this page, please send us your comments and we will update the guide as soon as possible.