| Account Active: |
No Yes |
| Account Name: |
(e.g., MyCompany) |
| SIP Server: |
(e.g., sip.mycompany.com, or IP address) |
| Outbound Proxy: |
(e.g., proxy.myprovider.com, or IP address) |
| SIP User ID: |
(the user part of an SIP address) |
| Authenticate ID: |
(can be same or different from SIP UserID) |
| Authenticate Password: |
(not displayed for security protection) |
| Name: |
(optional, e.g., John Doe) |
| Use DNS SRV: |
No Yes |
| User ID is phone number: |
No Yes |
| SIP Registration: |
No Yes |
| Unregister On Reboot: |
No Yes |
| Register Expiration: |
(in minutes. default 1 hour, max 45 days) |
| local SIP port: |
(default 5060) |
| SIP Registration Failure Retry Wait Time: |
(in seconds. Between 1-3600, default is 20) |
| SIP T1 Timeout: |
|
| SIP T2 Interval: |
|
| SIP Transport: |
UDP TCP
|
| Use RFC3581 Symmetric Routing: |
No Yes |
| NAT Traversal (STUN): |
No No, but send keep-alive Yes |
| SUBSCRIBE for MWI: |
No Yes |
| PUBLISH for Presence: |
No Yes |
| Proxy-Require: |
|
| Voice Mail UserID: |
(UserID for voice mail system) |
| Send DTMF: |
in-audio via RTP (RFC2833) via SIP INFO |
| Early Dial: |
No Yes (use "Yes" only if proxy supports 484 response) |
| Dial Plan Prefix: |
(this prefix string is added to each dialed number) |
| Delayed Call Forward Wait Time: |
(Allowed range 1-120, in seconds.) |
| Enable Call Features: |
No Yes (if yes, call features using star codes will be supported locally) |
| Call Log: |
Log All Calls
Log Incoming/Outgoing only (Missed calls NOT recorded)
Disable Call Log |
| Session Expiration: |
(in seconds. default 180 seconds) |
| Min-SE: |
(in seconds. default and minimum 90 seconds) |
| Caller Request Timer: |
No Yes (Request for timer when making outbound calls) |
| Callee Request Timer: |
No Yes (When caller supports timer but did not request one) |
| Force Timer: |
No Yes (Use timer even when remote party does not support) |
| UAC Specify Refresher: |
UAC UAS Omit (Recommended) |
| UAS Specify Refresher: |
UAC UAS (When UAC did not specify refresher tag) |
| Force INVITE: |
No Yes (Always refresh with INVITE instead of UPDATE) |
| Enable 100rel: |
No Yes |
| Account Ring Tone: |
system ring tone
custom ring tone 1
custom ring tone 2
custom ring tone 3
|
| Send Anonymous: |
No Yes (caller ID will be blocked if set to Yes) |
| Anonymous Method: |
Use From Header Use Privacy Header |
| Anonymous Call Rejection: |
No Yes |
| Auto Answer: |
No Yes |
| Allow Auto Answer by Call-Info: |
No Yes |
Turn off speaker on
remote disconnect: |
No Yes |
Check SIP User ID for
incoming INVITE: |
No Yes |
| Refer-To Use Target Contact: |
No Yes |
| Disable Multiple Media Attribute in SDP: |
No Yes |
Preferred Vocoder:
(in listed order) |
choice 1:
choice 2:
choice 3:
choice 4: |
choice 5:
choice 6:
choice 7:
choice 8: |
|
| SRTP Mode: |
Disabled Enabled but not forced Enabled and forced |
| eventlist BLF URI: |
|
| Special Feature: |
|