Get in touch

If you need help setting up an account or making a phone call, or would like to leave feedback on the site or service, please don't hesitate to let us know.

Contact us

If you have a technical issue, for example you can not place calls or you need help setting up your incoming number/VoIP device, then please click on the following link to set up an email to the technical department Email us

Configure the Linksys PAP2 VoIP Router

You can find you SIP registration details under the VoIP section of your Localphone Dashboard.

The Linksys PAP2 is a VoIP router which lets you use your traditional analogue telephone with Localphone’s VoIP services. This guide describes how to configure the device to work with your Localphone account.

Connect and Log in to Your Linksys PAP2

Follow the instructions that came with your Linksys PAP2 to connect and log in to the device’s configuration console.

Enter Your Localphone Account Details

Choose “Line 1” from the top navigation and on the new screen enter the following details to configure your Localphone account, leaving any other fields blank or as their default value:

Setting: Value
Proxy: localphone.com
Display name: [Full Name]
User ID: [SIP ID]
Password: [SIP Password]
Auth ID: [SIP ID]

Check Your Configuration

Now that you have added your Localphone account settings to the Linksys PAP2, the form should resemble the following:

Save Your Settings

Use the “Save Settings” button to store the new Localphone configuration.

Following the steps above, you should now be able to connect to Localphone and make and receive calls. For further information about configuring the Linksys PAP2, or for help with troubleshooting, please see:

This guide is provided for assistance. If you discover any errors in this page, please send us your comments and we will update the guide as soon as possible.